Year: 2012

ProNet Client Project Profile: Klawiter and Associates

By Lynda

We’d like to congratulate a/e ProNet client Klawiter and Associates on their design for the new ADK America offices in Los Angeles, California.

See the full press release here.

“Klawiter and Associates, Inc. has provided commercial interior planning and design services to an ever-growing list of clients for nearly twenty-five years. Jim Klawiter founded Klawiter and Associates in 1985 to fill a void in the marketplace by starting a firm that understands smart business practices could be enhanced by innovative design solutions… Klawiter and Associates is an active member of the U.S. Green Building Council with a large percentage of their staff LEED Accredited.” Read more about Klawiter and Associates at their website.

A Reasonable Contract

By Lynda

Risk Allocation is an important part of the contract negotiation process for Architects, Engineers, and other Design Consultants.

“In allocating risks by contract terms and conditions, the goal is to allocate the specific risks to the party with the best ability to manage them. Although a contract can assign ownership of risks to any party, there can be serious adverse consequences if a party assumes risks it can’t manage. A design firm, for example, isn’t in a position to manage site safety responsibilities that most appropriately belong to the construction contractor. Despite the practicalities, however, of who is actually in the best position to manage site safety, if the design firm agrees to such responsibility by contract, the designer may be found liable for site safety by courts and possibly the Department of Labor.

“To be reasonable, a contract must be reasonable for all parties involved. If a contract attempts to shift all the risks to one party or the other, it will create problems on the project. A one-sided contract is likely to cause hard feelings during contract administration. It may also increase the likelihood of claims turning into litigation. As a practical matter, this means parties are better served by negotiators who don’t try to negotiate a contract that unreasonably shifts risk to someone who can’t logically manage it or accept legal responsibility for it. Such risk transfer will cause problems in the long run, and may even create uninsurable losses and claims.

“In evaluating who the various risks should be assigned to, parties can develop a table or list of responsibilities and risks to more easily see which risks most logically belong to each party. For example, site safety typically falls to the construction contractor. Easements and rights-of-way, as well as site data, including geotechnical information, may logically be allocated to the project owner. Responsibility for exercising due care in the planning and designing of a project generally falls to the design professional performing those services.

“Problems begin when any of these risks are allocated to the party that is not technically responsible for the related services. Unless you are in a position to manage a particular risk, it is not appropriate for you to accept contractual liability for that risk.”

This is an excerpt from a/e ProNet’s Risk Management & Contract Review Guide for Design Professionals (© Copyright 2006; a/e ProNet & J. Kent Holland, Jr.), one of the many resources ProNet Member Broker’s provide to their clients. A digital version of the full guide is available for purchase ($19.99). Contact a/e ProNet today to get in touch with your local ProNet broker.

About the Author: J. Kent Holland is a construction lawyer located in Tysons Corner, Virginia,  (formerly with Wickwire Gavin, P.C. and now with Construction Risk Counsel, PLLC) representing design professionals, contractors and project owners. He is founder and president of a consulting firm, ConstructionRisk, LLC. He is also the author of Contract Concerns, a series of articles available on our website here.

Just a Rabbit? Small Projects Can Bite

By Lynda

Who doesn’t love a good Monty Python reference? With our latest ProNetwork Newsletter, Just a Rabbit? Small Projects Can Bite, we’ve proven that the classic moments in Monty Python and the Holy Grail can be made analogous to anything, even insurance. Or, more accurately in this case, to potential professional liability claims:

“King Arthur and his knights approach a cave known to be guarded by a ferocious beast.  Upon seeing that the beast is but a wee rabbit, they let down their guards, proceed forward and are savagely attacked.  Was the mistake having approached the cave at all or having done so without anticipation of the risk and use of appropriate protection?  I sometimes ask the same question of design professionals who undertake small fee projects and unhappily receive large claims. But it has always been true that little projects can generate big claims, particularly where we let informality replace careful practice and appropriate documentation.  In a troubled economy, a/e’s want to take the work and no responsible lawyer should tell you to minimize your risk by eliminating your work. Take the work but don’t skimp on process, procedures and gut feelings in contract negotiations and documentation, even if done less formally.

Just a Rabbit

“Like King Arthur’s knights, I have frequently heard that the project was just a rabbit, or just a slab on grade, or just a retaining wall, or just a room addition, or just a (fill in the blank).  Insurance statistics prove that smaller firms do not necessarily get smaller claims, nor do smaller projects necessarily generate only small claims.   A modest structural engineering engagement for balcony maintenance on a condominium building can bring in modest fees.  When one of the balconies collapses or defects become apparent in 350 identical units with 350 separate plaintiffs, the defense and repair costs can be astronomical.  The same can be true for a small church addition, with the church school remaining open during construction.

Just a Contract

“Aside from legalities, written contracts serve two important practical purposes.  First, before work begins, the contract serves as a discussion outline with which a client can be educated about what you do for a living, what they have to give you in order for you to do the work, what work you have in mind and, equally important, what work is not included. All of these topics are much more easily and less emotionally discussed before anyone has started working and before a problem has arisen.

“I frequently receive calls about contracts just as the a/e is finishing Construction Documents and realizes either that nothing has been paid to date or that a risky project is about to go out for bid. This is not ideal, but very common, and still better than having the discussion after CDs are out or a problem has arisen.  I also frequently receive calls after the contract is signed, work is proceeding and could I just take a quick look at the contract, because it is “just a room addition” or similar small project?  Once signed, there is little I can do but warn the a/e of the teeth on that rabbit.

“Contracts serve a second important purpose as well – to tell a third party (judge, jury, arbitrator, Grand Inquisitor) what the parties thought about the scope of services, risks, rewards and the deal before they got to court.  If you show up to court with a contract calling you “contractor,” saying that you will perform your services to the “highest, best” standards of care and that you intended to “ensure” a successful project, you will be hard pressed to proclaim otherwise, even if Mrs. Justaroomaddition was a little flaky and Mr. Justaroomaddition employed his brother-in-law to do some of the work.   You will also create insurance coverage problems for the claim, perhaps ending up with two lawyers and two lawsuits instead of one of each.  Use the same scrutiny of contract language for your small projects that you use for your large projects, because the same words can cause problems regardless of size of the work.”

Visit our website to continue reading this newsletter. You may download the full PDF version here.

ProNetwork News is the latest value-added resource produced by a/e ProNet. Each monthly edition includes an informative, timely article relevant to the design industry and authored by an industry expert. Contact your a/e ProNet broker for early access to these excellent newsletters.

About the Author: Eric Singer is a partner at Ice Miller, LLP. He concentrates his practice in construction law, with emphasis on the representation of architects, engineers, contractors, owners, and lenders as well as other professionals, in litigation and alternative dispute resolution of design and construction issues. Eric is an active speaker and prolific author on the subject of construction litigation and the liability of the design professional.

To Hire or Not To Hire?

By Lynda

As the American economy recovers, all eyes are on the construction design industry, a key indicator of the economic climate. Design professionals are preparing for the next phase of recovery in a variety of ways. Not only is there the hope that new projects will begin to come in soon, but there is a backlog of projects which began two or three years ago, but stalled. These projects have been pending in different stages, some abandoned completely, many without funding to continue. Unfreezing from that limbo would mean the potential for immediate work in many design firms, and that work could require additional hands.

In the April issue of CSPE Online, The Official Newsletter of the California Society of Professional Engineers, a/e ProNet Member Reno Caldwell published a column which addresses this exact scenario. For architects, engineers, consultants, and other construction industry professionals, this will bring up one very important question:

To Hire or Not to Hire?

Excerpt:

“Raise your hand if you were thinking of hiring someone this time last year.  Had I posed this question to a group of business owners in April 2011, I am confident not too many hands would have gone up.  The following two questions may still be far fetched, but if the tide begins turn and the project light-switch flicks up it’s worth asking both:

  1. When will your firm begin hiring?
  2. Will errors and omissions liability affect your hiring decision?

“You may be thinking that errors and omissions liability has nothing to do with a hiring decision.  Are you sure?  Most business owners understand the importance of balancing risk for the potential reward.   The term ‘reward’ probably seems distant, but many design and engineering firms have multiple projects that have long been in a perpetual ‘waiting’ mode.  Your office could get busy very quickly should these projects become active within a few months of each other, and as new projects come in the door.   Yes, this will be a happy day!

“However, many business owners have depleted their retirement savings in order to keep the lights on and doors open over the past three years.  It will be very tempting to replenish the bank account when the economy improves.   The risk management pendulum could swing quickly from ‘low risk / low reward’ to ‘high reward without considering risk.’  This move would be understandably tempting, but I urge you to take a closer look beforehand.”

To continue reading (and to get some valuable advice) visit IOA Insurance Services’ website for the full text of this article, as well as a downloadable PDF.

About the Author: Reno Caldwell is Vice President of IOA Insurance Services. He operates from the San Francisco Bay Area office in Pleasanton, CA, which he joined in 2007. He has specialized in providing professional liability insurance for design professionals, construction managers, law offices and other professional consultants since 1996. Reno is an affiliate member of the California Society of Professional Engineers; IOA is the exclusive broker of CSPE’s endorsed professional liability insurance program. reno.caldwell@ioausa.com

John Tenuto Named Regional President of IOA

By Lynda

Since its founding in Florida in 1988, Insurance Office of America (IOA) has added more than 20 branch offices across the country. Today, IOA is the largest privately-held agency in Florida and one of the fastest growing agencies in the U.S. At its National Sales Meeting in Orlando last month, the company appointed a/e ProNet Member John Tenuto as a Regional President of IOA.

Tenuto is Senior Vice President and Managing Partner of IOA Insurance Services, and he is the Branch Representative of the San Diego office, which he opened in 2005. Tenuto was appointed to the IOA Board of Directors in 2010, and this latest move by IOA places him in the position of Regional President over all IOA’s offices on the west coast.

Tenuto began his insurance career in 1985, developing his expertise at a number of prominent brokerages in both Northern and Southern California, including HRH, Barney & Barney, and Dealey, Renton & Associates. He also founded Tenuto & Associates Insurance Services in 1994, which was acquired by HRH in 2001. His practice focuses on providing his clients with property and casualty insurance products and various risk management services. Tenuto specializes in representing design and construction related firms.

“We are at a place in our company’s life where it makes sense to have more local leadership,” said IOA Chairman and Founder John Ritenour in last week’s announcement. “John is a huge asset to IOA and really cares about what we are building out west.”

Congratulations, John! And good move, IOA!

Pinterest Pride: An Homage

By Lynda

a/e ProNet has been an advocate for architects, engineers, and other design consultants for more than 20 years. This advocacy includes an abiding interest in protecting the integrity and sanctity of the products delivered by design professionals. We’re proud of what our clients can do and have done to better and beautify communities across the globe.

Taking that pride one step further, we’ve created a Pinterest board dedicated to showcasing the fantastic designs of our ProNet Members’ clients!

Buildings, bridge, amphitheaters, parks, homes, aqueducts, highways, theme parks, wineries, storefronts, and resorts surround and inspire us daily. But as Peter W. Jones, AIA, President of AIA Florida recently reminded us, “Behind every magnificent structure is an architect who helped create it.” In fact, behind every magnificent structure is a team of imaginative, experienced professionals who worked together to meet that goal. And we’re proud to say that many of those professionals are the clients of our members.

If you love design, follow our Pinterest board today!

a/e ProNet at SDA’s EDSYMPOSIUM12

By Lynda

Longtime design industry advocate, a/e ProNet, announced this week that ProNet President Leslie Pancoast will make a presentation at EDSYMPOSIUM12, the 42nd annual education conference hosted by the Society for Design Administration (SDA), an affiliate of The American Institute of Architects.

For more than 50 years, the SDA has promoted education and best practices for design firm administrative personnel. EDSYMPOSIUM12 will take place from May 2-5 at the Embassy Suites Hotel in Portland, Oregon. a/e ProNet will sponsor Saturday’s luncheon, where Pancoast will make a two-fold presentation: Introduction to a/e ProNet and Professional Liability—Coverages, Nuances and Endorsements. SDA members will learn more about a/e ProNet and its active support for the design industry, as well as receive a brief overview of professional liability coverage and the standard endorsements available from most professional liability insurance providers for architects and engineers.

About Leslie Pancoast

Pancoast has specialized in the insurance needs of architects, engineers and other design consultants for more than 20 years. She is a Managing Partner of Insurance Office of America (IOA), one of the largest privately-held insurance agencies in the country. She is also the Branch Manager of IOA’s San Francisco Bay Area office, operating in California as IOA Insurance Services, which she opened in 2005. Pancoast has earned the designations of Commercial Insurance Counselor (CIC) and Registered Professional Liability Underwriter (RPLU). She has been an active board member of a/e ProNet since 2005, and currently serves as the membership’s President.

About a/e ProNet

Established in 1988, a/e ProNet is a national network of specialist brokers. The group focuses on providing educational resources and risk management services to its members’ clients. Its member brokers represent a combined annual professional liability premium volume exceeding $300 million, giving top-tier insurance companies a major incentive to work closely with a/e ProNet to enhance their various a/e programs.

As well, a/e ProNet makes a wide range of Risk Management resources available to all design professionals via their website, including ProNet Practice Notes, Guest Essays, ProNetwork News, Contract Concerns, Typical Coverages, and Frequently Asked Questions.

a/e ProNet is excited about the opportunity to partner with the SDA in order to provide this value-added educational resource to design firm administrative personnel across the country.

Additional information is available about a/e ProNet by visiting their website, following them on Twitter, and/or Liking their Facebook page.

Right of Set-off on Unrelated Projects

By Lynda

The following is an excerpt for the most recent ProNet Guest Essay by Frank L. Pohl, Esq. and James C. Washburn, Esq.:

“Frequently, general contractors will work with the same subcontractor or supplier on two separate, unrelated projects. When that happens, the situation may arise that on the first project (Project A), the subcontractor defaults on its contract, resulting in a back-charge that exceeds the subcontractor’s contract balance, i.e. the subcontractor owes the general contractor money. On the second project (Project B), the subcontractor satisfactorily completed its work and is due money from the general contractor. It may seem obvious that the general contractor would have a right of set-off, allowing the general contractor to deduct the amount due from the subcontractor on Project A from the amount that the general contractor otherwise owes the subcontractor on Project B. Seemingly, the general contractor should only have to pay the net difference or be able to avoid paying the subcontractor anything if the back-charge on Project A exceeds the amount due on Project B. However, as outlined in this article, that seemingly straight-forward right to “net out” the competing claims might not always be available.

“There are several different factors that can frustrate the general contractor’s right of set-off. In some jurisdictions, state statutes may prohibit the general contractor from withholding from the subcontractor the amounts received from the owner for the subcontractor’s work, such statutes holding that those funds are held in trust for the benefit of the subcontractor. Some states might even find the withholding of funds received by the owner for the subcontractor’s work to be statutorily criminal. On projects covered by a payment bond, courts in some jurisdictions have held that even if the general contractor has a contractual right to set-off, the Surety may not. As a result, in those jurisdictions, notwithstanding the contractor’s contractual right of set-off, the subcontractor may be entitled to recover the full amount on Project B (from our scenario above) from the Surety without any deduction of the amounts the subcontractor owes on Project A. Given that the general contractor must almost always indemnify the Surety, such a result has the practical effect of eliminating the contractual benefit of a right of set-off. Additionally, in certain circumstances, by the discretion afforded to judges under the rules of civil procedure, courts have required the two competing claims to be handled by separate lawsuits independently and without regard to the general contractor’s claim of set-off. This article discusses these scenarios and others that impact the right of set-off.”

To continue reading, download a the full PDF version of this article at our website.

About the Authors:

Frank L. Pohl, Esq. and James C. Washburn, Esq. are partners in the law firm of Pohl & Short, P.A. in Winter Park, Florida.  Pohl & Short, P.A. is a business boutique law firm concentrating in four main areas of business law: commercial litigation, real estate law, corporate law and trusts and estates.  Mr. Pohl has been advising clients involved in all aspects of real estate development for over 30 years.  Mr. Washburn practices construction law and is Board Certified in Construction Law by The Florida Bar.

This article is intended for general discussion of the subject, and should not be mistaken for legal advice. Readers are cautioned to consult appropriate advisors for advice applicable to their individual circumstances.

ProNet Client Project Profile: Mark Cavagnero, FAIA

By Lynda

The AIA recently published a profile of a/e ProNet client Mark Cavagnero Associates of San Francisco, CA. This year alone, this highly acclaimed firm has received the AIA California Council Firm Award, the Contract Interiors Award for Historic Restoration (UC Berkeley Durant Hall), and the IIDA Northern California Chapter Merit Award (East Bay Center for the Performing Arts). A full list of Cavagneros projects, clients, and awards can be found here.

The following is an excerpt of the AIA article entitled Mark Cavagnero, FAIA: Growing Big Ideas:

In 28 years of architectural practice, Mark Cavagnero, FAIA, has come to realize that his job is to give words and meaning to this voice that communicate ideas about clients, organizations, and communities… Cavagnero works mainly with public nonprofits and what he refers to as other “nonprofit-like” institutions. In addition to government clients at the city, state, and federal level, his firm works with cultural and educational institutions such as the Fine Arts Museums of San Francisco, the Oakland Museum of California, and the California Film Institute. Not surprisingly, when asked to distill key lessons from his years of practice, his thoughts immediately drift to concept and vision. Cavagnero has learned that it takes patience, active involvement, leadership, and a broad, generous understanding of function to execute a big idea, whether for a nationally recognized museum or a small community pool.

According to the company bio, “Mark Cavagnero Associates’ design process begins with a careful investigation of the client’s goals and the project site… The firm welcomes the constraints of program, site, and budget as frameworks within which to create engaging architectural spaces. It is in the focused response to these project elements that the essential character of each project finds its voice. The purity of response—in form, material, and relationship to light and context—is always the firm’s goal.” To read more about Mark Cavagnero Associates, visit the firm’s website.

We applaud this recognition of Cavagnero as an architect who champions the broader ideals of his field, and we urge everyone to read the full profile here.