Much has been made in recent years about the low percentage of women in the engineering industry, but comparatively little progress has been made. The question remains: How do we encourage a young girl’s interest in designing, problem-solving, experimenting, developing, and building? Because if we can do that with the current generation of imaginative, technologically-inclined youngsters, there could well be a marked increase in the number of women who choose careers from among the broad range of engineering disciplines.

This new advertisement from GoldieBlox, which has “developed a set of interactive books and games to ‘disrupt the pink aisle and inspire the future generation of female engineers’”, is a fantastic start!

[youtube=http://www.youtube.com/watch?v=UFpe3Up9T_g&w=640&h=360]

 

Set to the tune of the Beastie Boys’ famously catchy Girls, we see the execution of a fabulous Rube Goldberg machine as a trio of excited would-be engineers uses their perpetually pink toys to play a new version of house.

There may be many answers to the question of gender disparity in the engineering industry, but this is definitely one of the more fun, optimistic ones. Well done, GoldieBlox! And just in time for Christmas.

pronetworknews_august2013This issue of ProNetwork News is meant to serve as a basic reference guide to the property insurance coverages typically purchased by design firms. Last month we posted a companion piece, Insurance 101: The Things You Always Wanted to Know About Liability Coverage But Were Afraid to Ask.

We continue our overview of insurance products of interest to design professionals with this review of property coverages that may apply to the needs of your particular practice. As always, we encourage you to ask your broker what insurance is right for you.

BUSINESS PROPERTY INSURANCE

Whether you lease or own your office, you need to insure office equipment, furniture, fixtures, computer equipment, phone systems, fax/copiers, valuable papers and fine arts for fire, theft and water damage. Insuring these valuables for “replacement cost” on an “all-risk form” means that your business is most likely to be reimbursed properly for a covered loss. If you lease furniture and equipment, the lessor will require this coverage and will be designated as a “loss payee.” Landlords of rented property usually require their tenants to maintain property coverage for the rented space to cover improvements and betterments provided to the leaseholder.

Since most design firms are heavily dependent on computer systems, it is important to properly inventory equipment and software.. For example, the cost to reproduce plans and specifications kept on computer files is significant when considering the insured value of valuable papers and records. However, no limit of insurance is a substitute for reliable backup procedures.

Stand-alone IT coverage packages, including security breach, are evolving almost daily. They can cover both first party losses (yours) and third-party losses (those for which you may be liable to others). Ask your broker what products may best apply to your needs.

VALUABLE PAPERS INSURANCE

A/E firms have in their possession valuable papers and documents whose destruction would prove very costly. Maps, plans, specifications and books are some examples. All-risk protection is generally available excluding wear and tear, gradual deterioration and vermin. Certain valuable papers may be insured specifically, or “scheduled.” More commonly, a blanket limit is established to cover all valuable papers. Articles insured on a blanket basis are covered for their replacement cost. Scheduled items are covered on a valued basis even though it is not possible to replace them with like kind and quality. Continue reading “Insurance 102: Property Coverages for Architects & Engineers”

why do i need an insurance brokerAt our fall meeting last month, a panelist asked an important question:

Why is an insurance broker necessary for design professionals? Shouldn’t architects and engineers be able to access insurance companies and purchase Professional Liability policies directly?

Members of a/e ProNet are professional, independent brokers who serve the insurance needs of design professionals. Membership in our association is by invitation only, and members must be experienced and have a minimum number of design professional clients, as well as a minimum amount of premium volume. Our members must also provide their clients with services beyond the sale of a professional liability policy.

In addition to knowing the professional liability marketplace, they negotiate the best product at the best price for their clients. That negotiation happens every year at renewal time, and because our members are independent—not obligated to any one insurance company—they are in the best position to compare and contrast policies. Often, the time and expertise this process requires is underestimated by A/E clients. With a specialist broker, the A/E can rest assured that they have an advocate annually, both in relation to their bottom line and their exposure as a professional in a demanding and risky environment.

Most importantly, though, that advocacy doesn’t end when the renewal has been processed. The rest of the year, our members’ clients can count on their specialist brokers to provide services such as contract review, accredited continuing education, and other risk management services. Continue reading “Why should Architects & Engineers use a specialist Insurance Broker?”

pronetworknews201305This issue of ProNetwork News is meant to serve as a basic reference guide to the liability insurance coverages typically purchased by design firms.

Let’s start with a key definition.

CLAIMS-MADE vs. OCCURRENCE

Most liability policies are written on an Occurrence policy form. Coverage is triggered on the date of the “occurrence” (defined as an accident, including continuous or repeated exposure to substantially the same general harmful conditions, causing damage). A claim asserted against the insured may be brought well after the occurrence.

In contrast, professional liability claims are often brought many years after an alleged act, error or omission. Insurance companies had to evaluate their exposures and better determine the premium necessary to cover such risk, so the Claims-Made policy form was created. The coverage trigger is the date the claim is made, and coverage applies only to alleged wrongful acts that happened after the retroactive date of your policy. Once the policy is canceled or not renewed, all coverage will cease.

Today, virtually all professional liability policies are provided on Claims-Made forms. In order to establish coverage, three conditions must be met:

  1. a policy must be in place at the time a claim is made
  2. the “retroactive” or “prior acts” date on the policy must be dated at least as far back as the services giving rise to the claim were provided
  3. notice must be provided to the insurer within the policy term or during a specified grace period

The advice of your insurance advisor is essential when reviewing Claims-Made policies with respect to mergers, acquisitions, splits and retirement.

This has been an excerpt of the May 2013 issue of ProNetwork News. The newsletter goes on to deal with all types of liability coverage, including Professional Liability Insurance, Commercial General Liability Insurance, Owners and Contractors Protective Liability Insurance, Workers’ Compensation and Employers Liability Insurance, Umbrella Liability Insurance, Employment Practices Liability Insurance, Directors and Officers Liability Insurance, and many more! Download the full PDF version of the newsletter here. Continue reading “Insurance 101: The Things You Always Wanted to Know About Liability Coverage But Were Afraid to Ask”

insurance_policyMost architects and engineers are required to have General Liability and Business Property insurance coverage. The former shows up in most design contracts, while the latter is an essential part of a design firm’s office lease agreement.

Needless to say, we get several common questions regarding these coverages:

What is General Liability coverage? What is Business Property coverage? What’s the difference between these coverages/policies and a Business Owners Package (BOP) Policy?

In an effort to demystify some of the concepts and to provide a quick reference a/e ProNet gathered some of its finest insurance minds and put together this basic manual: Insurance 101 for Design Professionals. This is not intended to be an exhaustive source of information but rather a primer designed to answer basic questions and to put the reader on the right track if more information is needed. a/e ProNet strongly recommends that the reader seek advice from an agent or broker specialist who is best equipped to understand the exposures to loss of each individual design firm.

The following is an excerpt from our Insurance 101 page, specifically defining General Liability, Business Property, and Business Owners Package (BOP). Access the full set of policy and coverage terms on our website.

COMMERCIAL PACKAGE AND BUSINESS OWNER PACKAGE POLICIES   

Insurance companies will combine frequently requested coverages under one economical package known as Commercial Package Policies or Business Owners Policies (BOP). One policy is designed to include among other coverages:

  • General Liability
  • Commercial Property
  • Non-Owned/Hired Automobile
  • Valuable Papers and Records
  • Business Interruption/Business Income Equipment Breakdown
  • Accounts Receivable

BOPs tend to be prepackaged policies available to smaller firms with little flexibility (other than limits) on available coverages. Commercial Package policies are offered to larger firms and provide a wide range of coverage options. Insurance companies that offer these policies to design professionals may require the insured to maintain professional liability insurance as a prerequisite to obtaining a package policy. Continue reading “Insurance 101: General Liability, Commercial Property & the Business Owners Package Policy”

beazleypro_summerissueOne of the several excellent insurance companies a/e ProNet works with has a new risk management resource for their professional clients: Beazley Pro.

We think our readers will be most interested in the Claims Corner; three scenarios, three discussions, three lessons learned. An example of a claim outlined in the Summer 2013 issue…

Engineer granted rare summary judgement

Facts:  After sustaining serious injuries in a fall in a sports facility parking lot, the plaintiff sued the property owner, who in turn filed a third-party action against our insured, an engineer. This suit against the engineer alleged that deficiencies and code violations in his design of the facility’s parking lot (specifically its handicap access ramp and lighting) were to blame for the fall. A site visit revealed that the lighting and lighting tower location in the parking lot were not as the engineer had specified. During deposition, the paving contractor affirmed that he used the engineer’s plan for pricing only, not for construction. Hence, there was no causal connection between any design deficiencies in the engineer’s plans and the plaintiff’s serious fall and injuries. Counsel moved for summary judgment, which was granted in full. Continue reading “A New A&E Resource: Beazley Pro Inaugural Issue”

aepronet_sda

In May this year, the Society for Design Administration (SDA), the nation’s largest professional organization for architectural and engineering design firm administrators and managers, announced its endorsement of a/e ProNet.

The proper management of professional risk factors such as contract administration, project administration, and document management are known factors in reducing professional risk in a/e firms.  Both SDA and a/e ProNet are dedicated to providing a/e firms the necessary tools to better manage risk and improve firm management. ~ Deborah A Gill, CPA, CGMA, CDFA, 2013 SDA President

As announced in the June/July 2013 issue of SDA Today, “a/e ProNet will pay one half of a new SDA member’s dues if that member’s insurance agent belongs to a/e ProNet… Chapters can partner with the local broker and reach out to principals and managers in their network.”

a/e ProNet and the SDA will also collaborate on a number of educational events, including the SDA’s annual EDSymposium conference. Last year, past a/e ProNet President, Leslie Pancoast, made two presentations at EDSymposium12 in Portland, Oregon, and current a/e ProNet President Jeff Todd spoke at EDSymposium13 in Williamsburg, Virginia earlier this year.

We look forward to a long and successful partnership with the SDA.

ProNetworkNews_2013AprilIn•dem•ni•fy Verb.

• Compensate (someone) for harm or loss.
• Secure (someone) against legal responsibility for their actions.

Imagine a case where an engineering firm was found to have had an expensive duty to defend claims asserted against a developer, even after the engineer’s performance was judged not to have violated the professional standard of care. That was the decision three years ago, in the California Court of Appeals in UDC – Universal Development L.P. v. CH2M Hill. In fact, that case extended another one, decided two years earlier in the California State Supreme Court. (Crawford v. Weather Shield Mfg., Inc.). That decision held that the duty to defend was incurred the moment that the indemnitee (the party that the design firm was contractually bound to indemnify) tendered its defense to the design firm.

Candidly, the indemnity provision underlying the UDC v. CH2M Hill decision was long and rambling, repetitive, and ambiguous. That’s what opened the door to the expansive (and expensive) legal interpretation. The clear message to design professionals was: if you do not want to take on the extensive defense and indemnity obligations implied or required by statute and case law, you must be clear. Further, the longer and more confusing an indemnity provision is, the more likely it is to receive an expansive reading.

The point of this article is to provide design professionals with a simple, three-step evaluation and corresponding “scoring” model to evaluate and improve the indemnity obligations it receives. Continue reading “Making the Grade: Testing Design Professional Indemnity Obligations”

structuralUsing a real-life claims scenario from “a structural engineer and senior partner in a small A/E firm that specialized in multi-family and commercial condominium projects”, William F. Dexter offers his view on the Top 3 Liabilities Facing Design Professionals in today’s increasingly litigious marketplace:

“Long after the construction documents have been published and permits issued, the architect or engineer flies into the Bermuda Triangle of construction phase services, which include review of shop drawings, payment certification and construction observation.   Let’s take a look at establishing solid guidelines to reduce the risks of these frequent situations by transferring liability back to the client and others who are always quite eager to let the design professional be responsible.”

Continue reading at the JDI Data website.