TheProNetBlog_Spring

Spring is in the air, and optimism surrounding the construction industry is at a new high!

We don’t want to kill the buzz, but this is as good a time as any to remember that your design firm isn’t impervious to crime-related loss or damage. Your insurance policy can (and should!) include a few specific coverages to protect you against things like Employee Dishonesty, Burglary, and Computer Fraud.

The following is an excerpt from our Typical Coverages for Design Professionals, and we hope it will educate you and give you some peace of mind:

COMMERCIAL CRIME COVERAGES

Commercial Crime Coverages include several separate insuring agreements. Some or all of these individual coverages may be selected, depending on the individual needs of a design firm:

Employee Dishonesty: This coverage pays for loss sustained by the insured employer up to a specified amount, caused by a dishonest act of an employee or employees covered under the policy. This includes dishonest acts of the embezzlement of money or property, including inventory, owned by the insured.

Forgery or Alteration: This coverage pays for loss sustained by the insured employer for forgery or alteration of checks (including blank checks) issued by the insured. Coverage may be extended to include checks forged or altered by employees as well as others. Continue reading “Commercial Crime Coverages for Architects & Engineers”

Tired of reading article after newsletter after white paper after blog post on risk management? (We hope not! But just in case…) Here’s another option:

[youtube https://www.youtube.com/watch?v=C2ioR9X05Qo]

Longtime a/e ProNet affiliate Kent Holland of ConstructionRisk, LLC has translated his impressive catalog of resources into a series of short videos available on the ConstructionRisk.com YouTube Channel.

“If you’re involved in the construction project, whether as a contractor, a designer, or a project owner, you will get real benefit from the practical ideas, suggestions, and law presented in these videos.”

A few of the playlists available now:

J. Kent Holland is a construction lawyer located in Tysons Corner, Virginia, representing design professionals, contractors, and project owners.

Don’t forget the popcorn!

PN - Vol. 21, No.2. 2013 - Building Information Modeling (BIM)Embracing the latest technology can set a design firm apart from the crowd, but it can also set you up for a rough road if you’re not adequately prepared beforehand. Building Information Modeling (BIM) is far from “new” at this point, but some wary design professionals have abstained from it anyway, allowing time to tell whether BIM would be a positive thing for the industry, overall. Good news!

“Building Information Modeling (BIM)… [has] not necessarily opened the door to more claims, as several carriers expected. A few [insurance companies] have found BIM projects to be low-risk; some even went as far as giving discounts to design clients that utilize BIM.” — Engineering, Inc., February 2014

a/e ProNet’s latest ProNet Practice Note, authored by Joseph Barra of Robinson & Cole, can take you from here. The following is an excerpt from Building Information Modeling (BIM): Now that you know how to spell BIM, is it right for you and your firm?

Building Information Modeling (BIM) is the process of developing a virtual, three-dimensional, information rich model to design, construct, and maintain a building project. BIM is much more than software used to produce a pretty 3D graphic. Because a variety of information can be embedded into the model, BIM can also be used to manage the project’s construction schedule (4D); to track project costs (5D); and, once constructed, facility management (6D).

There are varying levels of BIM adoption and use, from an initial pilot project with one player using BIM tools to a team process with agreed-upon collaborative BIM process goals. In ideal process, all project participants share information.

These times are a changin’…

Because BIM is about process and not just software, it gives designers and constructors a unique opportunity to eliminate the barriers to collaborative thinking. One example is found in the redundancies inherent in the shop-drawing process. In this case, the goal of the BIM process is to abolish the wasteful practice of having to draw the entire project twice. Because BIM facilitates teamwork, many see BIM as an opportunity to reach out across disciplines and reconsider the traditional paradigm. Make no mistake, we still need experienced architects, engineers, contractors, and owners to deliver a successful project. But in today’s BIM-enabled world, the process is becoming more collaborative, which in turn redefines the project team’s risk profile.

To continue reading, download the full PDF version of this newsletter, which outlines Factors to Consider before deciding to use BIM (e.g., Type of Project, Timing, Teammates, Project Delivery Method). And if you have additional questions about BIM and/or professional liability insurance, be sure to contact your local a/e ProNet broker today!

EngineeringInc_aeProNetad_2014

Incredibly, even the global economic crisis hasn’t hardened the Professional Liability Insurance market for Architects and Engineers. Today, there are more insurance companies offering A&E policies than ever. And, thanks to the increasing insurance savvy of Design Professionals (particularly those utilizing the services of specialist brokers), new Professional Liability insurers are offering more in the way of risk management and pre-claims assistance, too.

You’ll find all this information and more outlined in the The Hard Market That Never Came, an analysis of the 2013 Professional Liability Insurance Survey of Carriers, in the February 2014 issue of Engineering, Inc. Continue reading “Engineering Inc. – 2013 Professional Liability Insurance Survey of Carriers”

Happy New Year, friends & followers of a/e ProNet! We thought we ‘d take a moment to congratulate our friends over at Victor O. Schinnerer–one of the leading Professional Liability insurance companies in the industry today–on the new, updated Schinnerer Risk Management Blog.

schinnerer_riskmanagement_newblog

For a number of years, Schinnerer’s Risk Management Blog has been an excellent source of up-to-date industry news. Recent posts have included:

If you’re an Architect or an Engineer or a Design Consultant, whether or not your current professional liability insurance carrier is Victor O. Schinnerer, their blog is a great place to look for answers to your everyday questions about insurance, best practices, and, of course, risk management. These referenced posts on the old blog, so be sure to check out the archive. We also encourage you to subscribe to the new WordPress blog if you find this info relevant to you and your business.

Make sure to contact your local a/e ProNet broker if you’re interested in obtaining a Professional Liability quote from Schinnerer. Have a great 2014!

Much has been made in recent years about the low percentage of women in the engineering industry, but comparatively little progress has been made. The question remains: How do we encourage a young girl’s interest in designing, problem-solving, experimenting, developing, and building? Because if we can do that with the current generation of imaginative, technologically-inclined youngsters, there could well be a marked increase in the number of women who choose careers from among the broad range of engineering disciplines.

This new advertisement from GoldieBlox, which has “developed a set of interactive books and games to ‘disrupt the pink aisle and inspire the future generation of female engineers’”, is a fantastic start!

[youtube=http://www.youtube.com/watch?v=UFpe3Up9T_g&w=640&h=360]

 

Set to the tune of the Beastie Boys’ famously catchy Girls, we see the execution of a fabulous Rube Goldberg machine as a trio of excited would-be engineers uses their perpetually pink toys to play a new version of house.

There may be many answers to the question of gender disparity in the engineering industry, but this is definitely one of the more fun, optimistic ones. Well done, GoldieBlox! And just in time for Christmas.

pronetworknews_august2013This issue of ProNetwork News is meant to serve as a basic reference guide to the property insurance coverages typically purchased by design firms. Last month we posted a companion piece, Insurance 101: The Things You Always Wanted to Know About Liability Coverage But Were Afraid to Ask.

We continue our overview of insurance products of interest to design professionals with this review of property coverages that may apply to the needs of your particular practice. As always, we encourage you to ask your broker what insurance is right for you.

BUSINESS PROPERTY INSURANCE

Whether you lease or own your office, you need to insure office equipment, furniture, fixtures, computer equipment, phone systems, fax/copiers, valuable papers and fine arts for fire, theft and water damage. Insuring these valuables for “replacement cost” on an “all-risk form” means that your business is most likely to be reimbursed properly for a covered loss. If you lease furniture and equipment, the lessor will require this coverage and will be designated as a “loss payee.” Landlords of rented property usually require their tenants to maintain property coverage for the rented space to cover improvements and betterments provided to the leaseholder.

Since most design firms are heavily dependent on computer systems, it is important to properly inventory equipment and software.. For example, the cost to reproduce plans and specifications kept on computer files is significant when considering the insured value of valuable papers and records. However, no limit of insurance is a substitute for reliable backup procedures.

Stand-alone IT coverage packages, including security breach, are evolving almost daily. They can cover both first party losses (yours) and third-party losses (those for which you may be liable to others). Ask your broker what products may best apply to your needs.

VALUABLE PAPERS INSURANCE

A/E firms have in their possession valuable papers and documents whose destruction would prove very costly. Maps, plans, specifications and books are some examples. All-risk protection is generally available excluding wear and tear, gradual deterioration and vermin. Certain valuable papers may be insured specifically, or “scheduled.” More commonly, a blanket limit is established to cover all valuable papers. Articles insured on a blanket basis are covered for their replacement cost. Scheduled items are covered on a valued basis even though it is not possible to replace them with like kind and quality. Continue reading “Insurance 102: Property Coverages for Architects & Engineers”

why do i need an insurance brokerAt our fall meeting last month, a panelist asked an important question:

Why is an insurance broker necessary for design professionals? Shouldn’t architects and engineers be able to access insurance companies and purchase Professional Liability policies directly?

Members of a/e ProNet are professional, independent brokers who serve the insurance needs of design professionals. Membership in our association is by invitation only, and members must be experienced and have a minimum number of design professional clients, as well as a minimum amount of premium volume. Our members must also provide their clients with services beyond the sale of a professional liability policy.

In addition to knowing the professional liability marketplace, they negotiate the best product at the best price for their clients. That negotiation happens every year at renewal time, and because our members are independent—not obligated to any one insurance company—they are in the best position to compare and contrast policies. Often, the time and expertise this process requires is underestimated by A/E clients. With a specialist broker, the A/E can rest assured that they have an advocate annually, both in relation to their bottom line and their exposure as a professional in a demanding and risky environment.

Most importantly, though, that advocacy doesn’t end when the renewal has been processed. The rest of the year, our members’ clients can count on their specialist brokers to provide services such as contract review, accredited continuing education, and other risk management services. Continue reading “Why should Architects & Engineers use a specialist Insurance Broker?”

pronetworknews201305This issue of ProNetwork News is meant to serve as a basic reference guide to the liability insurance coverages typically purchased by design firms.

Let’s start with a key definition.

CLAIMS-MADE vs. OCCURRENCE

Most liability policies are written on an Occurrence policy form. Coverage is triggered on the date of the “occurrence” (defined as an accident, including continuous or repeated exposure to substantially the same general harmful conditions, causing damage). A claim asserted against the insured may be brought well after the occurrence.

In contrast, professional liability claims are often brought many years after an alleged act, error or omission. Insurance companies had to evaluate their exposures and better determine the premium necessary to cover such risk, so the Claims-Made policy form was created. The coverage trigger is the date the claim is made, and coverage applies only to alleged wrongful acts that happened after the retroactive date of your policy. Once the policy is canceled or not renewed, all coverage will cease.

Today, virtually all professional liability policies are provided on Claims-Made forms. In order to establish coverage, three conditions must be met:

  1. a policy must be in place at the time a claim is made
  2. the “retroactive” or “prior acts” date on the policy must be dated at least as far back as the services giving rise to the claim were provided
  3. notice must be provided to the insurer within the policy term or during a specified grace period

The advice of your insurance advisor is essential when reviewing Claims-Made policies with respect to mergers, acquisitions, splits and retirement.

This has been an excerpt of the May 2013 issue of ProNetwork News. The newsletter goes on to deal with all types of liability coverage, including Professional Liability Insurance, Commercial General Liability Insurance, Owners and Contractors Protective Liability Insurance, Workers’ Compensation and Employers Liability Insurance, Umbrella Liability Insurance, Employment Practices Liability Insurance, Directors and Officers Liability Insurance, and many more! Download the full PDF version of the newsletter here. Continue reading “Insurance 101: The Things You Always Wanted to Know About Liability Coverage But Were Afraid to Ask”