Inquiring Minds and the FMLA

family

Complying with the many provisions of the Family and Medical Leave Act (FMLA) is a concern for even those well-versed in the Act. Recently, the Ninth Circuit Court of Appeals clarified when the FMLA applies, and spelled out an affirmative duty of the employer to inquire and confirm if an employee wants to take FMLA leave if eligible.

What Is the FMLA and How Does It Apply?

The FMLA entitles some employees to take unpaid, job-protected leave for certain family and medical reasons. It applies to employers that are public agencies and to private employers with 50 or more employees who work at least 20 weeks in the current or preceding calendar year. An employee is eligible for FMLA leave if they:

  • Worked for a covered employer for at least 12 months;
  • Worked at least 1,250 hours during the 12 months prior to the start of their FMLA leave; and
  • Work at a location where at least 50 employees are employed or within 75 miles of that location.

An eligible employee has the right to take 12 work weeks of unpaid leave in a 12-month period. In general, the employee can take leave due to their own serious health condition; for the birth of a newborn child; to care for a newly-adopted child; or to care for a spouse, child, or parent with a serious health condition. This right means that if an employer terminates or otherwise retaliates against an employee for taking leave, it can result in a civil lawsuit or administrative proceeding against the employer for back pay, reinstatement, and other damages.

When a state provides greater protections than the federal FMLA standards, an employer must comply with state law as well. For example, the California Family Rights Act (CFRA) also covers same-sex domestic partners, and provides more privacy protections. Continue reading “Inquiring Minds and the FMLA”

PNN_1511In what attorney Brian Stewart calls a “disturbing trend,” more and more project owners design professionals to procure separate questionnaires from their insurance brokers. These “broker-verification questionnaires” are meant to re-state or re-affirm the limits, exclusions, etc. of the relevant insurance policies to the project.  If you’re an architect or engineer who has met push-back from your broker on this issue, our November 2015 issue of ProNetwork News explains why:

I:  The Problem with Broker Verifications

The use of broker-verification questionnaires has been a growing trend seen most commonly in the context of construction insurance… Historically, a broker has satisfied this requirement through the production of a certificate of insurance or, if necessary, a copy of the policies themselves which demonstrate that the insured had the applicable coverage.  However, a number of project owners have recently been refusing to accept certificates alone and are requiring brokers to complete a questionnaire and verification, with the understanding that a failure to complete the questionnaire will cost the broker’s client the job.

The increasingly frequent use of such broker-verification questionnaires raises a number of legal issues for the broker.  The first issue deals with the broker’s authority to interpret the underlying policy between the insurer and the insured and whether a broker has the authority to confirm in writing whether a specific policy meets the requirements, not of the contract between the Owner and the insured but rather the requirements contained in the broker-verification questionnaires.  The second legal issue deals with the effect of a conflict between the underlying policy and the language of the questionnaire.  Specifically, what is the legal consequence when a broker completes a questionnaire that potentially contains conflicting language from the actual policy?  Finally, this opinion will analyze what risks and liabilities a broker is exposed to when completing  a questionnaire that contains language that is in conflict with  or amends, modifies, expands, etc. the underlying policy.

II:  Principles of Contract

Insurance is a matter of contract governed by the rules of contract. Unlike the ordinary commercial contract where the parties seek to ensure a commercial advantage for themselves, an insurance contract seeks to obtain some measure of financial security and protection against calamity for the insured.

Being a voluntary contract, as long as the terms and conditions made therefor are not unreasonable or in violation of legal rules and requirements, the parties may make it on such terms, and incorporate such provisions and conditions as they would see fit to adopt.  The rights and obligations of parties to an insurance contract are determined by the language of the contact and the insurance policy is the law between the parties unless the contractual provisions are contrary to public opinion or law.

III:  Role of the Broker

An insurance broker provides a professional service for the insured, its client and goes to the insurance market to determine what policy or policies best fit the needs of its clients.

Relevant distinctions exist between an insurance agent and an insurance broker.  Whereas an agent generally represents a particular insurance company, an insurance broker generally represents only the insured. Consequently, an insurance broker owes a duty to the insured and not the insurer. Continue reading “The Down-Low on Broker-Verification Questionnaires”

PNN_1411Which is better, more or less documentation in your project file after the job is complete? Despite recent advances in technology, document retention has become a difficult, expensive and complex proposition. Computers have changed design professionals’ work flows and methods, greatly increasing efficiencies, but also exponentially multiplying the volume of data; e-mails, attachments, drawing revisions, text and voice messages, not to mention folks are still sending faxes and letters, actual paper ones. All of this adds up and can become an unmanageable mess, even for the best of us.

Making decisions now about which project documents to keep and which to discard is like trying to pick who will win the Super Bowl in the year 2024. You never know which ones will be the most important until you are right in the middle of a claim. Experience and common sense tell us that there are certain documents that, no matter what, are probably safe bets to come in handy down the road. You may also be required by law or contract to keep certain records for certain time frames.

This article will offer suggestions on those categories of critical project documents necessary to defend claims, and which ones are better off being discarded as a matter of course after project completion. The question ultimately is framed as “what to keep and for how long?” Of course, these are only suggestions, and you should discuss implementation of any document retention program with your chosen legal and accounting advisors in your specific jurisdiction. Further, this article only addresses retention of construction project documents and not corporate, HR or tax records.

“Age of Discovery”

Modern construction projects, with all this data, are subject to modern lawsuits. These lawsuits are conducted by increasingly younger, tech savvy and sophisticated lawyers who sometimes make the litigation more about the discovery effort than about the facts of the case. Parties are allowed to submit detailed and specific “requests for production of documents” once in the lawsuit, or issue subpoenas to non-parties. State and federal court discovery rules could require parties to turn over copies of all information they have in their possession related to the project. Continue reading “Document Retention: More Paper or Paper-Less?”

PNN_1503In the world of claims-related contract clauses for design professional agreements, the indemnity and defense clauses get all the attention.  However, lurking in the shadow of the indemnity clause is a menacing cousin with potentially even greater and more frequent impact and risk:  the prevailing party attorneys’ fee clause.  Both clauses share the common risk that they are often not covered by professional liability insurance because each represents a contractually-assumed liability which would not exist in the absence of the contract.

The indemnity clause draws the far greater attention because that obligation and exposure often arises during the claim by way of the defense obligation, as opposed to the attorneys’ fees clause which ultimately comes into play definitively only after a final judgment.  Moreover, many design professionals (and especially their CFOs) are attracted to the prevailing fees clause as a means of effectively collecting unpaid fees.  Without such a clause, they worry that the expense of pursuing collection of unpaid fees will eat up much of the ultimate recovery.  Accordingly, it has some initial positive appeal.

However, that appeal is limited in perspective and overlooks the far greater potential negative impact of the prevailing party attorneys’ fees clause in the context of a professional liability claim which is the all too common response to even justified actions to recover unpaid fees.  As opposed to the indemnity and defense obligation, the prevailing party attorneys’ fees clause will apply far more frequently.  The indemnity and defense clause applies only where the client itself is facing a third-party claim.  By contrast, the prevailing party attorneys’ fees clause will generally apply to every client dispute, regardless if third parties are involved.  Since the majority of claims against design professionals come from the project client, that makes it far more likely and relevant. Moreover, where professional liability issues are involved in the dispute, the presence of the clause may actually dilute the design professional’s fiscal advantage. Specifically, absent the perceived panacea of the prevailing party attorneys’ fees clause, design professionals frequently hold a superior financial advantage during claims by virtue of their insurance which will fund defense costs as compared to the client claimant which is often left to fund the costs of litigation from their own resources. The unfortunate reality is that pacified by the promise or potential to recover their attorneys’ fees at the end of the dispute, many client claimants and their attorneys incur far more than they would absent that prospective reimbursement—even to the point of incurring multiples in expense beyond the prospective recovery. Even if the claim is largely defeated or reduced, even a minimal net recovery may establish the client as the prevailing party entitled to recover the attorneys’ fees incurred in the action.

Whether expressly stated as such, or not, it is important to recognize that a prevailing party attorneys’ fees clause is almost always a two edged sword equally available to both parties. As a matter of consumer protection, nearly every state has statutes which refuse to recognize one-sided attorneys’ fees clauses and automatically convert the clause into a bilateral clause entitling and exposing each side to the benefits and burdens of the clause. (See for example Oregon Revised Statute 20.096 and Florida Statute Section 57.105(7).) Accordingly, a clause which purports to entitle the design professional to recovery of its attorneys’ fees in pursuit of its fees will most often to create and equivalent right of recovery in the client for contract related claim.

Whether proposed by the client or by the design professional, prevailing party attorneys’ fees clauses are a common component of many commercial contracts, including design professional service agreements. An unqualified prevailing party attorneys’ fees clause is almost never a good idea for a design professional. Where such a clause is proposed, the following five options present a descending structure of preferred approaches. In proposing or negotiating any of these five options, frequently the best rationale in support of these approaches is that any dispute should focus on resolution of the dispute and not arming the lawyers for battle.

This has been an excerpt of the March 2015 issue of ProNetwork News, titled Prevailing Party Perils: Attorney’s Fees’ Clauses in Professional Service Contracts. To continue reading about the five preferred approaches to dealing with an unqualified prevailing party attorneys’ fees clause, click here to download the full PDF version of our newsletter for free.

About the Author

David A. Ericksen is a principal shareholder in and immediate past President of the law firm of Severson & Werson in San Francisco, California, and leads the firm’s Construction and Environmental Practices. For over twenty years, Mr. Ericksen has specialized in the representation of architects, engineers, construction managers, design-builders, and other construction professionals. Mr. Ericksen’s expertise covers all aspects of such professional practice as lead litigation and trial counsel, as well as being an active resource for risk management, strategic planning, and transactional matters. He is a trusted and valued resource to design and construction professionals and their insurance carriers across the United States and beyond. He has been repeatedly recognized as an industry leader, including being named a Construction “SuperLawyer” for the last eight years. He is a graduate of Boalt Hall School of Law, University of California, Berkeley, a former law clerk to the Washington State Supreme Court, and a member of and resource to numerous construction and environmentally-related professional organizations. Mr. Ericksen is a frequent speaker before construction professional organizations such as the AIA, SEA, ACEC, CSI and others, as well as providing in-house training seminars for firms.

“Brochurebiage”

brochurebiage

Yes, “brochurebiage” is a word we made up. It refers to that optimistic and puffed‐up verbiage that can creep into a professional’s brochures or other promotional materials. Many people are rightfully proud of their past work and skill and need to sell that experience and ability to prospective clients. However, use such language with caution.

Licensed professionals promoting themselves as the best around can be an effective way to attract clients. The risk comes when they enter into a contract that refers to or incorporates language in promotional material because it could needlessly raise the standard of care. In California, while licensed professionals may hold themselves to a high personal standard, the default legal standard by which professional negligence or malpractice is evaluated is the standard of care of an average professional in the same field and community. This default standard of care is favorable for licensed professionals because it means to avoid liability, they do not need to be perfect. After all, who is?

This average standard of care can be modified however through contract. Professionals sometimes inadvertently do this when a contract refers to or incorporates a proposal or other promotional item that promises superlative services or the “highest standard of care.” Including a standard of care that goes beyond what is required by law unnecessarily raises the bar for performance and exposes the professional to a greater risk of liability if there are allegations that the work was anything less than perfect. Additional problems may arise because professional liability insurance typically covers the average standard of care, so a contract promising a higher standard might not be covered, which could leave the professional on the hook alone.

To minimize this risk, avoid exaggerated language that over‐promises in contracts. Rather than say a professional will provide the absolute best services, say they work hard to provide professional services that lead to successful projects. Show clients examples of superlative work. Finally, avoid contracts that refer to or incorporate promotional materials because that could unnecessarily raise the standard of care, or limit such incorporation only to the scope or fee portion of the proposal. Highlighting past success and emphasizing skill is necessary to generate business, but exercise caution and balance when using or referring to brochurebiage in contracts.

This article has been reprinted with permission from its authors, David E. Barker and Erin Dunkerly of Collins Collins Muir + Stewart LLP in California. 

Nothing contained in this article should be considered legal advice. Anyone who reads this article should consult with an attorney before acting on anything contained in this or any other article on legal matters, as facts and circumstances will vary from case to case.

PNN_1405Seen any changes the past thirty years in the delivery of professional design services?  Sure, you have—particularly in the area of construction documents. Raised stools and drafting tables, pounce, and lead-darkened calluses on the middle finger of the draftsmen have, for the most part, yielded to CAD. Although CAD’s promise of error-free drawing may have proven elusive, many of its other promises have been fulfilled. Some even appear understated in hindsight—in part because CAD and the Internet seem to have been made for each other. Their combined effect reduces trying to list all the ways CAD has changed project delivery to a futile exercise.

Like CAD in the ‘80’s, BIM seems to hold similar promise today—a fact not lost on contractors, A/E’s, and project owners alike. Digital models are more-and-more often offered or requested as “deliverables.”  And multiple models for the same project are not uncommon—as building team participants explore their usefulness at various stages of design and construction. Some models are used much like enhanced CAD construction documents, provided and controlled largely by the A/E. But many incorporate data contributed by sources other than licensed design professionals, including suppliers, fabricators, contractors, and subs. Not surprisingly, many contractors and construction managers view BIM as a means for carving out an increased share of the project delivery pie—and are taking full advantage of it as both a marketing and performance tool. Some of them have even become the primary creators and custodians of digital models. Of course, that is not altogether unnatural. After all, it’s hard to ignore a tool that can show what will be built—and also to be useful in actually building it. Continue reading “The Design Professional in the Age of BIM: Things that change; things that don’t.”

construction

Sometimes the grounds for termination are absolutely clear. And sometimes several legal options are available. But when preparing to terminate a subcontract, there’s one more question to ask: Is this the right business decision? We turn to Burns Logan’s Southeast Construction Law Blog for the answer.

The following is an excerpt from a September 2014 post on the blog titled Subcontract Termination: Not for the Faint of Heart:

After a few weeks of poor performance by the stucco subcontractor, my client and I sat down to determine all the possible avenues to resolve the issues. The first thing we did was pull out the subcontract which controlled the stucco subcontractor’s work. We wanted to be sure that the subcontract included all the necessary provisions to allow my general contractor client to remedy the situation. Some of the common default provisions in subcontracts include:

  • failure to prosecute the work promptly and with due diligence;
  • failure to prosecute the work in a workmanlike and safe manner;
  • failure to supply proper supervision;
  • failure to properly staff the job;
  • failure to supply materials and equipment of proper quality and quantity;
  • failure to promptly correct defective or deficient work;
  • failure to pay sub-subcontractors or suppliers;
  • failure to maintain the project schedule as directed by the contractor; and
  • failure to submit proper progress and completion schedules.

We found that this subcontractor had violated many of the standard default provisions in my client’s subcontract. Therefore, we felt we had the proper authority to issue notices of default.

Continue reading “Subcontract Termination: The right business decision?”

constrobservationConstruction observation is a powerful weapon for architects and engineers (A/E) in their risk management arsenal. Certain clients understand the benefits when A/E firms offer construction phase services. However, driven by slow economic conditions, many clients are asking firms to do more, with less, including reducing or eliminating construction phase services. Other clients decide they will administer the construction contract themselves or decide to use a third party instead of the A/E firm. Clients have also held the A/E to a higher standard of care when providing construction observation services. How do these actions affect A/E firms?… It significantly increases the A/E’s risk and liability exposures.

Construction Phase Risks

Details in design documents cannot anticipate every contingency that may occur during the construction phase. If the A/E firm of record is not retained to provide clarification of the plans and specifications the risk of misinterpretation of the contract documents increases. Bad decisions can lead to project confusion, delays, increased costs, disputes and claims between the owner and the A/E.

The exposure of the A/E is increased due to certain owners and contractors asserting that the designer has a similar responsibility of the contractor for discovering all defects on the project. Based on this distortion and unrealistic expectation of construction observation services, owners and contractors have stated the A/E should be a guarantor of the contractor’s work. These expectations dramatically increase the A/E’s standard of care and risks associated with construction phase services. Court decisions have ruled in Owners’ favor holding that the A/E has a duty to guard the owner against all non-conforming work on the project, although much of that work was completed when the firm was not present on-site. Members of the plaintiff’s bar continue efforts to hold the A/E accountable for this higher standard of care for construction phase services. Continue reading “Construction Observation: Important Risk Management Service”

wooden gavel and books on wooden table,on brown background

The following is an excerpt from a recent Gordon & Rees LLP article entitled California Supreme Court Holds Principal Architects Owe Duty of Care to Future Homeowners:

On July 3, the Supreme Court of California published its decision in Beacon Residential Community Assn. v. Skidmore, Owings & Merrill. In short, the court concluded that prime architects designing residential buildings owe a duty of care to future homeowners even though they do not actually build the projects themselves or exercise ultimate control over their construction.

Of importance, Beacon involved a demurrer at the trial court level meaning that, on appeal, the Supreme Court was required to accept the facts pled in the plaintiff’s amended complaint as true. This included the allegation that the Beacon project’s designers provided their services “knowing that the finished construction would be sold as condominiums.” It also was claimed that the defendants played an active role throughout the construction process, including coordinating efforts of the design and construction teams, conducting weekly site visits and inspections, recommending design revisions as needed, and monitoring compliance with design plans. For their various services, the designers were reportedly paid $5 million. The plaintiff alleged that negligent design work resulted in several defects, including extensive water infiltration, inadequate fire separations, excessive solar heat gain, structural cracks, and other safety hazards…

Although not a total loss for the design community, Beacon will have the effect of expanding architects and engineers (A&E) liability to a broader spectrum of claimants and generally keep A&E defendants in lawsuits for longer periods of time.

For an explanation of the court’s decision, including a concise summary of the affects of the ruling on Architects and Engineers, visit the original Gordon & Rees post by attorney Dion N. Cominos.

Complex precedents like this are just one of the reasons why A&Es are best served by consulting specialist brokers about their Professional Liability insurance needs. Does your current professional liability insurance policy include pre-claims assistance? How about the latitude to choose your own council in the event of of a claim? Call your local a/e ProNet Broker and get answers to these questions today.